Tilia Labs’ flagship imposition solution, tilia Phoenix, searches across millions of possibilities to calculate the most cost-effective ganging and nesting combinations for up to 1000 orders at a time.
Tilia Labs and Cerm team up to extend prepress efficiencies for label printers
“Plug and Play” solution combines intelligent ganging with leading-edge estimating and production management
(Ottawa, Canada) November 29th 2017 – As part of a strategy of integrating with key technology partners, Tilia Labs, a leading developer of planning, imposition, and automation software solutions for the graphic arts industries, has announced a new partnership to benefit label printers. In a development with Cerm, a major MIS provider to this sector, the two companies will combine their strengths to offer integrated prepress capabilities dedicated to maximizing efficiencies in label print production on an ongoing basis.
The initial result of the collaboration between the two companies is a new, seamless integration between Cerm MIS and tilia Phoenix ganging capabilities to deliver a “Plug and Play” solution for optimizing sheetfed label production workflow, from design through to distribution.
According to Geert Van Damme, Managing Director of Cerm, increasing demand from customers for an “intelligent ganging system” acted as the catalyst for Cerm to explore options for a dedicated imposition solution: “Cut & Stack sheetfed label producers were asking for a sophisticated capability that would allow them to combine a variety of labels with different sizes, colors and quantities on print sheets.”
“We tested several different offerings and options with a number of customers and tilia Phoenix came out way ahead in every respect,” continues Van Damme. “Its speed was the first thing to impress everyone. It also offers an extensive set of preferences, allowing the print shop to align the system with its routine production habits. The user can make any number of changes to the chosen option and even save it as a template for the future. On top of this, the system is very intuitive – for usability it couldn’t be matched.”
Tilia Labs’ flagship imposition solution, tilia Phoenix, draws on new developments in Artificial Intelligence (AI) in automating planning and imposition for all types of devices and print applications. At its hub is Imposition AI, a set of tools and protocols designed to search across millions of possibilities to calculate the most cost-effective ganging and nesting combinations for up to 1000 orders at a time. The system factors in parameters, such as job specifications (quantity, dimensions, colors, substrates), presses/print devices, postpress requirements, and delivery considerations, to deliver optimal layout options.
In the combined solution, the Cerm MIS interfaces directly to Phoenix as to an intelligent ‘black box’, without the need to switch back and forth between applications. A group of individual orders can be ganged in the most competitive way, based upon the calculation of total production costs. The preferred ‘option’ can be stored during estimation and re-used for repeat production runs, even allowing individual elements within the template to be swapped for identically shaped labels. If significant changes are called for, the gang-sheet can be opened, elements can be replaced or added and then re-ganged. When a final option has been selected, tilia Phoenix generates print-ready ganged layouts and imposition JDF instructions. Van Damme comments that, due to Cerm’s existing integration with Esko Automation Engine, the Phoenix JDFs will automatically drive Esko’s platemaking, offering additional time and cost savings to the print shop.
“In line with our strategic focus on selecting and integrating with the best technology partners, we’re thrilled to join forces with Cerm,” comments Sagen de Jonge, CEO of Tilia Labs Inc. “Tilia and Cerm customers can now tap into a wealth of combined knowhow via a single source to gain a very powerful management system. The ongoing development opportunities are also promising - Cerm are already looking at our die-cut capabilities to explore the potential of developing a joint offering. This is not simply a technical interface between the two systems, it’s about complete solutions that will evolve with new developments from both sides over time.”
Founded in 1983, Cerm offers a modular, process-efficient solution designed to meet the specific needs of label printers around the world. Cerm is an independent vendor, partnering with industry leaders to form a complete end-to-end business solution for its customers. Headquartered in Belgium, Cerm has an installed based in Europe, Australia and North America, with local support. Cerm is a member of the Heidelberg group. For more information visit : www.cerm.net
About Tilia Labs
Tilia Labs is a software company based in Ottawa, Canada that builds prepress software for planning, imposition, and automation of applications spanning the full range of graphic arts sectors including packaging, labels, commercial, and wide format printing. With a keen focus on emerging IT developments, the company is dedicated to identifying disruptive technologies capable of delivering real competitive advantage to its customers and partners worldwide. Maintaining ease-of-use as a core principle, Tilia Labs has designed a portfolio of products to deliver a seamless interface between prepress data and printer in generating fast, accurate estimates, reducing prepress time, automating error-prone tasks, maximizing media usage, and reducing post-press complexity. Founded in 2012, Tilia Labs has a network of partners and resellers worldwide. For more information visit: www.tilialabs.com
Source: Tilia Labs